Gareth, Kody, and Christian got the chance to sit down and chat with Joe Jeremy! They started with Joe’s impressive career starting as a carpenter all the way through founding Niscon. Along the way they also got to talk about some of the cool projects Joe’s worked on all around the world.By Creative Conners Inc.

Mike, Kody, Christian, and Gareth have been squashing lots of bugs over the last month and have lots to say about them. In the midst of bug squashing Gareth also built a 6-axis show and Kody designed a new Stagehand.By Creative Conners Inc

Mike, Kody, Christian, and Gareth get together to chat about CAT1 stopping and brake sequencing for an upcoming job in Hawaii. Kody and Mike also recount some of the fun from USITT this year, all of which leads to an impromptu discussion about our headphones.By Creative Conners Inc.

Gareth, Mike, Kody, and Christian are back discussing some of the ever-green tech support issues and some of the new products that were proposed during Creative Conners’ annual product summit. All of this set to the dulcet tones of general contractors renovating the new offices.By Creative Conners Inc.

Gareth, Mike, Christian, and Kody are back discussing bringing New features to old controllers, big New Spikemark features, and the New ways they’re looking at the company and what they do.By Creative Conners Inc.

Kody, Christian, Mike, and Gareth are here to look back on 2023 in this very special bonus episode.By Creative Conners Inc.

Kody, Christian, Mike, and Gareth chat for 4 hours about the Geffen Vortek retrofit that Kody and Christian were just on site for, and even in this abridged version they follow all the tangents.By Creative Conners Inc.

Mike, Kody, Christian, Harry, and Gareth are back at it introducing some new service offerings from Creative Conners. In the midst of all the new they(Kody) experience some technical difficulties and really lean into the “other cool tech” part of the show with some tangents about Windows and cameras. Finally they say farewell to Harry as he moves o…

The gang's all here! Kody, Christian, Harry, Mike, and Gareth are back this time discussing the upcoming improvements to Spikemark groups, the brand new Spotline Mini, and some cool new features in Fusion 360. Along the way they get distracted with Christian’s impeccable naming skills as well as a few other things.…

Gareth’s back on the podcast with Christian, Kody, Harry, and Mike. They have lots to say about some custom jobs, new products, cool sensors, and much more.By Creative Conners Inc

On this episode Kody, Christian, and Harry talk about the influx of custom projects. From building lifts in the parking lot to tricky servo installs. Oh yah and on top of all that we’re moving shops!By Creative Conners Inc.

Kody, Christian, and Harry are back talking about the myriad of custom design and stock product design going on in July. In between all the design talk they also squeeze in some Spikemark feature teasers and a really really really cool Spikemark pro tip. Additionally they get another perspective on how to name a four post lift and a book recommenda…

The Stagehand Pro 5 is officially released! With the Pro 5 out in the wild Harry, Kody, and Christian talk about the last push of development and testing on it. As well as some of the custom projects working through the shop right now.By Creative Conners Inc

Mike, Kody, and Christian chat through how Spikemark and the Stagehand convert the encoder feedback into usable distances and then how the Stagehand remembers that position. They also explore how target tolerance, max position error, and position lag time all play a role in motion.By Creative Conners

Kody, Harry, Mike, and Christian continue the series of peer interviews this time with Brian Fauska. Brian recently joined the team at Creative Conners but before that he worked for Seattle Rep for over a decade, and he recounts some of the cool effects he’s done as well as some unfortunate baths in hydraulic fluid.…

Mike, Kody, Christian, and Harry talk about a couple quick turn around projects, recount USITT 2023, and then dive deep into the top tools to bring onto site.By Creative Conners

Mike, Kody, and Christian talk about how the development of Spotline v2 and Stagehand Pro 5 are coming along, and Mike shares some insights from installing some of the gear on site. They also tease some new features in Spikemark and new swag that will be shown off at USITT both 339.By Creative Conners Inc.

Kody, Harry, Mike, and Christian continue our peer interview series with Bo Bogaev. Bo recently joined our merry band of automation misfits, settling here in Rhode Island after nearly a decade on the road as head carpenter for numerous Broadway tours.By Creative Conners

Kody and Christian dive deep on some exciting Spotline and Stagehand developments while Mike recounts some of the big tech support woes from last month.By Creative Conners

We are trying something new! Kody, Harry, and Christian kick off a new series where we invite peers in the industry to chat about automation. This time we talk to Ben Clark, Assoc. Professor at SDSU and freelance Technical Designer. We talk about how he got his start in automation, why he wrote a book and some of the cool stuff he’s worked on over …

Kody, Mike, Harry, and Christian talk about some new Spikemark UI updates coming soon, check in on how the development of Stagehand vNext is coming along, and talk through some troubleshooting pro tips learned this month from tech support.By Creative Conners

Mike, Christian, and Harry talk about some cool product iterations, training happening for us and for you, and then round out the episode with our most favorite segment camera talk.By Creative Conners

Kody, Mike, and Christian get together to talk about some cool Spotline vNext accessories, some Spikemark wishlist features, and lots of tech support. Also Mike and Kody finally did it. Did what? Well listen and find out.By Creative Conners

Kody, Mike, Christian, and special guest Gareth chat about the happenings around the shop and chat a bit about the company turning 18 in this svelte one and a half hour episode.By Creative Conners

Kody, Mike, Christian, and Harry are back at it talking about all the recent VFD and Stagehand vNext development going on. In addition Harry and Mike talk about the new free turntable template now available for download.By Creative Conners

Listen along to Mike and Kody talk about doing an upfront in New York and Christian ramble on about VFD parameters.By Creative Conners

Kody, Mike, Christian, and Harry are all in Rhode Island and chatting about this month's onsite work as well as some new cool product development with a hint of lasers thrown in for good measure.By Christian Basse

The guys talk about the new four post lift design as well as the new pivot. Mike and Kody also recap USITT and talk about all the job openings at Creative Conners.By Creative Conners

Kody digs deep on the custom lift for a Las Vegas spectacle. Christian gives the update on Stagehand vNext. Mike is still mired in turntable troubles. And the gang is heading to USITT!By Creative Conners

Mike stops by to walk through 8 turntable stories from the fall. Kody & Christian get new cameras.By Creative Conners

The guys wrap up 2021 with a discussion of lifting safely with Stagehand control, a recap of LDI 2021, Kody’s camera quest, and gear for next year. Lifting safely with Stagehand control LDI recap Kody’s camera quest continues Black Friday buys Christmas gearBy Creative Conners

Kody, Christian, and Gareth are back to chat about: Split accel/decel and Stagehand vNext Modbus improvements on the horizon Crazy component shortages Product Summit 2022 New cameras!By Creative Conners

Christian, Kody, and Gareth are back with our second episode of 2021 (yeah, yeah, we know…). But we had a lot of fun chatting about a giant donut for a game show, a not-a-Floorpocket lift for a show in Las Vegas, and waffling about buying new Macs. [Warning] We get a little salty in this one.By Creative Conners, Inc.

Check it out! Spikemark 5 is nearly ready for release so Christian and Gareth decided to release a video version of Circuit and Gear so you can see the action. Join them for a tour of Spikemark 5’s new features, and hear some of the stories behind its development.By Creative Conners

Christian is back on the show to talk about big new features that are coming to both the next iteration of Stagehand motion controllers and Spikemark software. And then we talk a lot about cameras too. Fixing the Cue Grid in Big Show Mode Extending the Stagehand motion controller for load cells Adding dedicated cross-groove detection inputs to the …

Mike is back joining Gareth to talk about: Training with the Trainee Mike’s new video training series Austerity measures in the shop to conserve costs and carry on This one gets a little salty in spots, especially in the blooper reel. You’ve been warned.By Creative Conners

Kody and Gareth get excited about the launch of Trainee (a new educational kit for scenic automation) and discuss its genesis in detail.By Creative Conners

Kody & Gareth dive deep, really deep, on new development work inside Spikemark to make it better to use on large shows with many axes. Problems Cue grid side-scrolling Slow loading Jogging Facility vs production needs Solutions New cue sheet Jog screen Filtering and tagging Theatre vs Show Pre-release screenshots These features may never ship as sh…

Bridget Katzanek joins Gareth this month to chat about her new role heading up the Creative Conners West Coast Rental Office. Though we’re still bumbling around amidst the COVID pandemic shutdown, listen in to meet Bridget and learn about our Los Angeles rental operation!By Creative Conners

We’ve got a gaggle of automation junkies this month on the show. Join Steve, Zep, Mike, Harry, Christian, and Gareth as we talk about how we’ve been bumbling through the pandemic work-wise. The past 4 months have been adventures in broadening horizons as the live events have been shut down. We’ve been working on new designs for the eventual re-open…

This weeks episode we dive, (or is it move?) into the world of automation with Gareth and Ethan Gilson. We discuss the differences between traditional rigging and automation, how it's implemented, and how and when it can be a useful tool. https://creativeconners.com/ https://www.amazon.com/Scenic-Automation-Handbook-Gareth-Conner/dp/1138850276 http…

Kody joins from NYC to talk with Gareth about: March 2020 COVID early days The final chapter in summer 2019 hydraulics Spotline Mini installation in Chicago CCI West!! We are opening an office in LA (whenever LA opens again)By Creative Conners

Harry Beauregard is back to chat with Gareth about: A new deck winch – The Pushstick Zero Autodesk University RARR – Real world risk assessment for kooky machineryBy Creative Conners

Kody & Steve join Gareth to discuss some non-automation cool tech tools. We chat about: Cameras Basecamp OTS - Off the Shelf Wrike NotabilityBy Creative Conners, Inc.

Kody Green sits to down to talk about: Theatre Calgary’s Christmas Carol and Sky Turtle Kinetic sculpture spinner New Showstopper products Kody building stuff that he designed before he travels around the world to install it…By Creative Conners, Inc.

By Creative Conners, Inc.

Christian pops into the podcast studio to talk about software development. Specifically, we dig into: Spikemark features, the Pendant, and some custom Beckhoff controls.By Creative Conners, Inc.

Steve Hnath sits down with Gareth to chat a bit about what he does at Creative Conners, a bit of his history, and then we dive deep on the Pushstick Mini.By Creative Conners

Mike and Gareth are back and bettah than evah. Topic include: - Custom camera lifts for ESPN - Spotline Mini final design and execution - Custom Floorpockets and sunroofs in California - Sky Turtle flies to Calgary - Middel East chain motor challengesBy Creative Conners, Inc.

Eek! This was recorded back in April, but got stuck in editing because of some sound quality issues. Enjoy the delayed release. Mike and Gareth discuss: A new hoist design for the Marriott resort in Chicago Fox News studio automation Jesus Christ Superstar custom machinery Challenges providing full-service automation…