Go offline with the Player FM app!
Rack Refrigeration Class Part 1
Manage episode 421920888 series 2997090
This podcast episode is Part 1 of a Kalos class on rack refrigeration given by Matthew Taylor. This first segment focuses on the basic refrigerant circuit and oil management of a parallel rack system, common in market refrigeration.
Parallel racks follow the same general process as any other compression refrigeration system. However, they contain multiple compressors on a single rack. These systems have multiple suction lines that tie into one single suction header that feeds into multiple compressors. The suction side of the piping is usually a long distance with varying elevations; risers are vertical stretches of piping that carry oil and refrigerant up and pose a challenge for oil return.
The compressor takes low-pressure vapor on the suction side and turns it into high-pressure vapor on the discharge side. From there, the condenser rejects heat from the refrigerant, which brings the superheated vapor down to saturation temperature and further rejects heat to make the refrigerant fully liquid (subcooled). Metering devices drop the pressure of the refrigerant, and the cases contain evaporators that absorb heat and boil off refrigerant, which travels to the compressors via the suction lines.
Parallel racks come in multiple varieties, but the ones in this podcast are of the direct expansion (DX) variety. Saturation remains a critical principle in these systems: superheat, subcooling, and the pressure-temperature relationship all drive system operation.
Matthew also covers:
- Different types of rack refrigeration systems
- Customized variations between racks
- Looking up case information and reading legends
- Oil return and controlling velocity
- Mechanical subcooling
- Full load amps (FLA) and locked rotor amps (LRA)
- Temperature glide: dew point, bubble point, and midpoint
- EPR installation
- Evaporator efficiency and superheat
- Compressor types
- Compression ratio and liquid or vapor injection
- Oil management components and controls
Have a question that you want us to answer on the podcast? Submit your questions at https://www.speakpipe.com/hvacschool. Purchase your virtual tickets for the 5th Annual HVACR Training Symposium at https://hvacrschool.com/Symposium24. Subscribe to our podcast on your iPhone or Android. Subscribe to our YouTube channel. Check out our handy calculators here or on the HVAC School Mobile App for Apple and Android.
723 episodes
Manage episode 421920888 series 2997090
This podcast episode is Part 1 of a Kalos class on rack refrigeration given by Matthew Taylor. This first segment focuses on the basic refrigerant circuit and oil management of a parallel rack system, common in market refrigeration.
Parallel racks follow the same general process as any other compression refrigeration system. However, they contain multiple compressors on a single rack. These systems have multiple suction lines that tie into one single suction header that feeds into multiple compressors. The suction side of the piping is usually a long distance with varying elevations; risers are vertical stretches of piping that carry oil and refrigerant up and pose a challenge for oil return.
The compressor takes low-pressure vapor on the suction side and turns it into high-pressure vapor on the discharge side. From there, the condenser rejects heat from the refrigerant, which brings the superheated vapor down to saturation temperature and further rejects heat to make the refrigerant fully liquid (subcooled). Metering devices drop the pressure of the refrigerant, and the cases contain evaporators that absorb heat and boil off refrigerant, which travels to the compressors via the suction lines.
Parallel racks come in multiple varieties, but the ones in this podcast are of the direct expansion (DX) variety. Saturation remains a critical principle in these systems: superheat, subcooling, and the pressure-temperature relationship all drive system operation.
Matthew also covers:
- Different types of rack refrigeration systems
- Customized variations between racks
- Looking up case information and reading legends
- Oil return and controlling velocity
- Mechanical subcooling
- Full load amps (FLA) and locked rotor amps (LRA)
- Temperature glide: dew point, bubble point, and midpoint
- EPR installation
- Evaporator efficiency and superheat
- Compressor types
- Compression ratio and liquid or vapor injection
- Oil management components and controls
Have a question that you want us to answer on the podcast? Submit your questions at https://www.speakpipe.com/hvacschool. Purchase your virtual tickets for the 5th Annual HVACR Training Symposium at https://hvacrschool.com/Symposium24. Subscribe to our podcast on your iPhone or Android. Subscribe to our YouTube channel. Check out our handy calculators here or on the HVAC School Mobile App for Apple and Android.
723 episodes
All episodes
×Welcome to Player FM!
Player FM is scanning the web for high-quality podcasts for you to enjoy right now. It's the best podcast app and works on Android, iPhone, and the web. Signup to sync subscriptions across devices.