Reliability Matters is a podcast on the subject of reliability of circuit assemblies. Reliability "best practices" and success stories are discussed. This podcast features interviews with experts in the electronic assembly industry. All electronic production segments which effect product reliability are on the table. This includes contamination, coating, cleanliness assessment, inspection, building for harsh environments, reflow, printing, failure analysis, board fabrication, and much more. ...
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Episode 149: AOI and X-Ray Best Practices
1:14:48
1:14:48
Play later
Play later
Lists
Like
Liked
1:14:48
In today's episode, we're exploring automated optical inspection (AOI) and x-ray inspection technology within the electronic assembly industry. Joining us are two experts who bring a wealth of knowledge and experience to the table. Joel Scutchfield is the General Manager of SMT and Semicon Business Operations & Director of Sales at Koh Young, manuf…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Special episode: Surface Mount Technology International - 2024
40:48
40:48
Play later
Play later
Lists
Like
Liked
40:48
Just like the famous line from the 1984 film, The Terminator, “I’ll be back”, SMTAI is back. Back to the Chicago area. We’re back in Rosemont, co-located with the Assembly Show, at the Donald E. Stephens Convention Center, October 20-24. Between SMTAI and the Assembly Show, there will be thousands of engineers and industry professionals in attendan…
…
continue reading
Recorded live in Anaheim California during the IPC Apex Expo. This episode features three interviews including: • Kimberly Fagan from PVA • Taylor Wagan from CETEC ERP • Neil Hubble from AkrometrixBy Mike Konrad
…
continue reading
Recorded live in Anaheim California during the IPC Apex Expo. This episode features four interviews including: • David Chiu from Test Research, Inc. • Michael Dolan from South-Tek • Dalton Dodge from Brooks Automation • Michelle Ogihara from Seka Machinery, Inc.By Mike Konrad
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Episode 146: IPC Apex Special (part 1 of 3)
29:36
29:36
Play later
Play later
Lists
Like
Liked
29:36
Recorded live in Anaheim California during the IPC Apex Expo. This episode features three interviews including: • Gus Mavrou from Seho • Mark Stansfield from Solderstar • Jesper Lykke from ViscomBy Mike Konrad
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Episode 145: Designing Electronics to be Reliable in Harsh Environments
1:05:58
1:05:58
Play later
Play later
Lists
Like
Liked
1:05:58
The challenging world of electronics becomes even more challenging when the end product is destined for harsh environments. For high reliability products operating in a harsh environment, the quest for reliability is not just a goal—it's an imperative. These are not your everyday gadgets; often they're critical components of systems designed to ope…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Episode 144: A Conversation with Indium's Rick Short about Education-Based Marketing
59:41
59:41
Play later
Play later
Lists
Like
Liked
59:41
We’re the best, we’re number one, we’re better than them, we’ve won more awards than our competitors, we’ve all seen those ads. While this form of advertising isn’t unique, when’s the last time it caused you to buy a product based on the ad. I think we all know that answer. There was a time when we relied heavily on print advertising to determine w…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Episode 143: A Candid Conversation with Industry Icon Doug Pauls
1:16:29
1:16:29
Play later
Play later
Lists
Like
Liked
1:16:29
We’ve discussed the silver tsunami on the show numerous times, the unprecedented rate of which employees are retiring. When engineers and other employees retire from companies, they take with them more than a set of gold cufflinks or an engraved plaque. In many cases, they also take with them wisdom and knowledge. Perhaps this is never more true th…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Episode 142: Live from SMTA's Pan Pacific Strategic Electronics Symposium (PanPac)
38:26
38:26
Play later
Play later
Lists
Like
Liked
38:26
This episode was recorded at SMTA's Pan Pacific Strategic Electronics Symposium on the big island of Hawaii. My guests on this episode are Dr. Chuck Bower, founder of PanPac, Keith Bryant, and Dr. Ron Lasky. We discussed the history of PanPac, technologies introduced at PanPac, and what makes PanPac so unique. We also discuss Dartmouth College's un…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Episode 141: Component Tape Splicing Best Practices with Larry (The Professor) Welk
57:05
57:05
Play later
Play later
Lists
Like
Liked
57:05
Optimization has become an important goal within the electronic assembly industry. While modern electronic assembly techniques utilize a variety of equipment, one specific type of equipment often consumes a disproportionate percentage of the overall equipment budget, that is the place machine. The cost of the machine, associated conveyors and feede…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Episode 140: Circuit Board Design and Acquisition Best Practices
1:10:28
1:10:28
Play later
Play later
Lists
Like
Liked
1:10:28
This episode is a little different from our usual episodes. First of all, it’s a dual-branded episode. It’s both a Reliability Matters Podcast and an Ecosystem podcast episode. The Ecosystem podcast host Judy Warner will join me for an unusual topic, at least for The Reliability Matters Podcast. Most of my audience are assemblers of circuit assembl…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Episode 139: Environmentally Responsible Alternatives to Traditional PCB Fabrication
55:12
55:12
Play later
Play later
Lists
Like
Liked
55:12
Today, we delve into an increasingly critical aspect of technology and electronics manufacturing - the pursuit of environmentally responsible electronics manufacturing. Our industry has witnessed many environmental revolutions. The elimination of popular cleaning solvents brought on by the Montreal protocol in 1989, soon followed by strict VOC re…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Episode 138: Hand Soldering and Rework Best Practices with Debbie Wade
1:11:03
1:11:03
Play later
Play later
Lists
Like
Liked
1:11:03
Today we're diving deep into the world of precision and craftsmanship—two crucial elements in the realm of hand soldering and rework of circuit assemblies. Whether you're a seasoned electronics enthusiast, a hobbyist, or just someone with a curious mind, this episode promises to demystify the art and science behind hand soldering and rework. We'll …
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Episode 137: Building a Sustainable Career with a Sustainable Impact
1:15:40
1:15:40
Play later
Play later
Lists
Like
Liked
1:15:40
Today, we delve into the crucial aspects of maintaining well-being on this journey—how to sidestep the notorious burnout, and perhaps more importantly, how to fuel and maintain your motivation. Because, let's face it, the road to creating a meaningful impact can be demanding, and it's essential to navigate it with resilience and purpose. Join me fo…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Episode 136: Environmentally Responsible/Sustainable Conformal Coating with Dr. Cassandra Zentner
1:04:07
1:04:07
Play later
Play later
Lists
Like
Liked
1:04:07
We covered the topic of ultrathin conformal coatings back in November. We covered various conformal coating materials from traditional acrylics and silicones to ultrathin parylene coatings. What other coating materials are available? Where do these types of coatings fit within specific applications? Where do health and safety, environmental concern…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Episode 135: A Conversation with Dr. Zach Peterson about Board Design Best Practices
1:13:54
1:13:54
Play later
Play later
Lists
Like
Liked
1:13:54
In today's increasingly connected and digital world, PCBs are the unsung heroes that power our devices, from smartphones to spacecraft. Yet, the art and science of designing these crucial components often go unnoticed. That’s where this episode comes in. Today, I hope to shine a spotlight on the critical role PCBs play in modern technology and ex…
…
continue reading
On this episode, I have no guests as this is the final episode of the Reliability Matters Podcast for the 2023 season. Instead, let's review what happened on the podcast this year. A special thanks to my guests and listeners/viewers for making this podcast so successful.By Mike Konrad
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Episode 133: Novel Wireless / Wearable ESD Monitoring
1:05:55
1:05:55
Play later
Play later
Lists
Like
Liked
1:05:55
We are all aware of the damage electrostatic discharge can wreak on components and electronic products. We mitigate ESD damage through various forms of monitoring. We wear wrist and heel straps, stand on ESD-safe flooring, utilize ESD work stations, and more. We even have ESD testing locations that will test a human standing on a specialized testin…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Episode 132: A Conversation about Ultra-Thin Conformal Coating with HZO's Lisa Rizzo
1:00:42
1:00:42
Play later
Play later
Lists
Like
Liked
1:00:42
Today we’ll dive deep into the world of conformal coating. More and more assemblies are being subjected to conformal coating to protect the assembly from harsh environments. What’s leading the drive to conformal coat electronic assemblies? What types of conformal coating options are available? What are the advantages and disadvantages of each type?…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Episode 131: A Conversation with Industry Icon Bob Willis
1:09:24
1:09:24
Play later
Play later
Lists
Like
Liked
1:09:24
We are all aware of the supply chain issues our industry has faced. Beginning with electronic components, it has spread to so many other types of parts are industry relies on. Fortunately, it looks like we are beginning to come out the other end of the supply chain shortage. But the supply chain problems have further spread to the labor market. If …
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Episode 130: Human-Centered Approaches to Innovation with Dr. Alexis Abramson
1:03:25
1:03:25
Play later
Play later
Lists
Like
Liked
1:03:25
Some of you may recall episode 121 where I spoke with Dr. John Mitchell, president and CEO of IPC about his new book “fire your hiring habits”. During that episode, we talked about best practices for hiring the best people. I’d like to travel a little bit up the river to talk about where potential candidates for hiring come from. While most of the …
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Episode 129: Network Reliability - Avoiding Cyber-Security Threats
1:16:00
1:16:00
Play later
Play later
Lists
Like
Liked
1:16:00
We talk almost exclusively about reliability on this show. Specifically, reliability of circuit assemblies. We discuss production best practices, design for manufacturing and reliability. Failure analysis, and more. We’ve reviewed the latest trends in industry 4.0, the connectivity of machine to machine and machine to management. We discussed big d…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Episode 128: Industry Standards Explained with Leo Lambert
1:03:21
1:03:21
Play later
Play later
Lists
Like
Liked
1:03:21
Those of us in the electronic assembly space are no doubt aware of standards. In the simplest terms, standards tell us how to build products correctly. They differentiate correct from incorrect. They tell us what type of materials to use, how a solder joint is determined to be acceptable. Standards tell us how to test various parts of our assembly.…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Episode 127: Ask the Experts - A Conversation with Phil Zarrow & Jim Hall
58:59
58:59
Play later
Play later
Lists
Like
Liked
58:59
Welcome to another episode of the Reliability Matters podcast. For those of you keeping track, this is episode number 127. In recent episodes, we’ve covered high-level issues, such as hiring best practices, novel, training, methods, design for manufacturing, highly accelerated, life, testing, and more. On this episode, we’re going to go back to the…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Episode 126: Moisture Mitigation Strategies with Dan Jenkins and Rob Lowery
1:00:17
1:00:17
Play later
Play later
Lists
Like
Liked
1:00:17
Moisture. The industrial world has been fighting moisture since the beginning of the industrial world. From a general point of view, moisture leads to issues such as • Mold and mildew • Rust • Wood rot • Damage to building materials • Microbial growth • And so much more. In the electronics world, moisture creates a host of reliability problems incl…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Episode 125: DFM Best Practices with Pride Industries' Engineering Manager Andrew Williams
1:07:28
1:07:28
Play later
Play later
Lists
Like
Liked
1:07:28
As all of you are well aware, this show is all about reliability, specifically reliability of circuit assemblies. One challenge that seems to be persistent within our space is design for manufacturability or DFM. If you’re a contract manufacturer, I have no doubt that you’ve had the experience of being asked to build a product that seems unbuildabl…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Episode 124: Industry Icon Dave Hillman's Amazing 3,600 Mile Kayak Journey Down the Missouri River
1:21:05
1:21:05
Play later
Play later
Lists
Like
Liked
1:21:05
Industry icon Dave Hillman completed a 3,600 mile solo kayak journey down the Missouri River. I spoke with Dave about the inspiration for the journey, insights gained over his four-month expedition, and how his experience as an engineer helped him prepare for this epic experience.By Mike Konrad
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Episode #123: Introduction to HALT – Highly Accelerated Life Testing with Dr. Christopher Jackson
1:05:57
1:05:57
Play later
Play later
Lists
Like
Liked
1:05:57
We all strive to build products that are reliable. If you’re listening to our watching this podcast, chances are you are concerned about or at least interested in reliability. Where does reliability start? Who is responsible for reliability? What types of reliability testing can be performed? My guest on this episode will help answer these and othe…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Episode 122: The Integration of AI Into Inspection Systems
1:09:08
1:09:08
Play later
Play later
Lists
Like
Liked
1:09:08
When it comes to circuit assemblies, there are defects, which result in one of two situations. The preferred result of a defect is to capture it on your factory floor and repair it before it ships to the customer. The second scenario is referred to as an escape. That’s when the board ships to the customer and fails in the field. This is a scenario,…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Episode 121: Dr. John Mitchell discusses his new book "Fire Your Hiring Habits"
1:10:00
1:10:00
Play later
Play later
Lists
Like
Liked
1:10:00
Most of us are well aware of the supply chain shortages, both within our industry and well beyond. Some of us are also keenly aware of labor shortages. This show is all about reliability of circuit assemblies. While reliability is often referred to as a process, it is also rooted in culture. Reliability begins with people. So, instead of talking ab…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Episode 120: Making Reliability Training Entertaining and Effective
59:25
59:25
Play later
Play later
Lists
Like
Liked
59:25
Can reliability training the both entertaining and effective? The Manufacturing Game's Michelle Ledet Henley has a different approach to traditional training methods. Michelle Ledet Henley has worked with The Manufacturing Game since 1998 as a developer of new simulations and training material. She has traveled worldwide in her capacity as a facili…
…
continue reading
I first met my guest at the SMTA Pan Pacific Symposium in Hawaii this past January. He was presenting a paper entitled Quantum Technology, A Theoretical Overview of the Possibilities. The more I listened to and watched his presentation, the more I wanted to learn about quantum physics and mechanics. So I selfishly invited him onto my show today so …
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Episode 118: Making "Big Data" Useful with Intraratio's Ryan Gamble
1:20:03
1:20:03
Play later
Play later
Lists
Like
Liked
1:20:03
The subjects of Industry 4.0 and Big Data have been widely discussed on this podcast. What is Industry 4.0? What data is our industry collecting? And, perhaps more importantly, how can we sift through all of that data to make it useful and actionable? To help answer these and other data-related questions, I invited Ryan Gamble, CEO and Founder of I…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Episode 117: When Residues Cause Circuit Assemblies to Fail
29:31
29:31
Play later
Play later
Lists
Like
Liked
29:31
My guest, Eric Camden (Lead Investigator with Foresite) and I discuss electrochemical migration (ECM) and other failure modes caused by residues on circuit assemblies. Eric Camden's Contact Information: ericc@foresiteinc.com https://www.foresiteinc.comBy Mike Konrad
…
continue reading
On this episode, I speak with Mark Goodwin, COO of Ventec Europe, a supplier of copper clad laminates and prepreg bonding materials for the circuit board fabrication industry about supply chain challenges. Mark Goodwin's Contact Information: mark.goodwin@ventec-europe.com http://www.ventec-group.comBy Mike Konrad
…
continue reading
You don't have to be in the tech industry you understand importance and value of data. Industries have always collected various sets of data, first manually and, in modern times, automatically. The volume of data has historically been limited to the ability to capture and store it. Recent advances in technology have vastly increased the ability to …
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Episode 114: The Remarkable Return of the Post-Reflow Cleaning Process
1:12:10
1:12:10
Play later
Play later
Lists
Like
Liked
1:12:10
On this show, we’ve discussed many aspects of the Electronics assembly process. We talked about reflow, thermal management, printing, soldering materials, additives, and so much more. What do all these topics have in common? When done correctly, they all contribute to the reliability of circuit assemblies. Today, we’re going to dive into the subjec…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Episode 113: A Conversation about Counterfeit Component Detection with Dr. Eyal Weiss
1:15:01
1:15:01
Play later
Play later
Lists
Like
Liked
1:15:01
Episode 113: A Conversation about Counterfeit Component Detection with Dr. Eyal Weiss We are all aware of the “oldest profession in the world”. Perhaps the second oldest profession is counterfeiting. Whenever a product is introduced, a counterfeit version soon follows. While the electronics industry has experienced counterfeit components from its i…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Special Episode: A Conversation about Business Challenges with STI Electronics' President David Raby
27:39
27:39
Play later
Play later
Lists
Like
Liked
27:39
David Raby is President of Madison Alabama-based STI Electronics, a contract manufacturer for the EMS industry. David worked at the family business since he was a child and eventually took over the family business when his father (and company founder) Jim Raby retired. The electronics industry moves at the speed of light and any business within the…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Episode 112: A Conversation about ESD Mitigation with ESD Expert Christopher Almeras
1:14:51
1:14:51
Play later
Play later
Lists
Like
Liked
1:14:51
Electricity is the life blood for all circuit assemblies. It can also afflict significant damage via electrostatic discharge. My guest, Christopher Almeras of Raytheon reviews the various ESD mitigation strategies as well as some ESD horror stories! Christopher Almeras began his career in process engineering for a small electronics manufacturer in …
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Episode 111: Liquid Metal’s Potential Future in Electronics
1:15:04
1:15:04
Play later
Play later
Lists
Like
Liked
1:15:04
Historically, circuit assemblies are rigid devices. IoT (Internet of Things) has opened up the opportunity to embed electronics into a near limitless array of form factors. Some of these form factors require the electronic assembly to be flexible such as in wearable and medical applications. To complicate matters, The metal conductors on the assemb…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Episode 110: A Wrap-Up of the Reliability Matters 2022 Season
8:59
8:59
Play later
Play later
Lists
Like
Liked
8:59
On this episode, there are no guests, and no specific topics. I would like to use this opportunity to thank my guests, our syndication partners, and, of course, my audience for making this podcast so successful. We have a full season ahead in 2023 and I'm excited to share those episodes with you. Please keep your questions and topics suggestions co…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Episode 109: A Decade of Industry 4.0 - What it Was - What it Wasn't
1:09:29
1:09:29
Play later
Play later
Lists
Like
Liked
1:09:29
Industry 4.0, the fourth industrial revolution. Beyond the buzzwords, what does this mean? My guest today is David Graham, Chief Technology Officer of 4IR.UK, a wholly owned subsidiary of Internet of Things focused, British Systems. 4IR.UK specializes in creating Monitoring, Control and Automation solutions, often based on the MultiPlug Edge Comput…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Episode 108: A Preview of the Upcoming SMTA Pan Pacific Microelectronics Symposium
48:42
48:42
Play later
Play later
Lists
Like
Liked
48:42
Welcome back to another episode of the reliability matters podcast. For those who are counting, this is episode number 108. SMTA is well known for producing high-quality relevant technical conferences and symposiums. This includes, among others, the technical conference held at SMTAI, the High reliability cleaning and coating conference, the sympos…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Episode 107: IPC Validation Services & the Trusted Supplier Program
54:51
54:51
Play later
Play later
Lists
Like
Liked
54:51
Like most manufacturers, the electronic manufacturing industry relies on countless suppliers to fulfill its manufacturing needs. I'm quite certain there is no one within the EMS space who fabricates their own boards using materials produced in house, operates their own semiconductor foundries, designs and manufacturers their own components, and pro…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Episode 106: A Conversation about Production Automation
53:02
53:02
Play later
Play later
Lists
Like
Liked
53:02
It's been said, on this show, that one key factor to international competitiveness is automation. While labor rates vary widely across the world, automation helps to level the field. My guest today is Michael Mchale, CEO of Production Systems Automation, otherwise known as PSA. Michael graduated from Drexel University with a BS degree in mechanical…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Episode 105: Conformal Coating Material Selection Best Practices
1:07:47
1:07:47
Play later
Play later
Lists
Like
Liked
1:07:47
A new episode of the Reliability Matters Podcast is now available. Episode 105: Conformal Coating Material Selection Best Practices Today, we’re diving into conformal coating best practices. With the explosion of IOT, the electrification of vehicles, and the miniaturization of circuit assemblies and associated components, many of which are operatin…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Special Episode: A Sneak Peak at the SMTAI Technical Conference with the Technical Committee
41:16
41:16
Play later
Play later
Lists
Like
Liked
41:16
Surface Mount Technology International 2022 is quickly approaching. My guests today are SMTA President Dr. Martin Anselm, a Professor at Rochester Institute of Technology (RIT) and Technical Committee members Julie Silk of Keysight Technologies and Raiyo Aspandiar of Intel. Together, my guests review the technical conference tracks as well as speci…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Episode 104: A Conversation about ESD Flooring with Thomas Ricciardelli
57:12
57:12
Play later
Play later
Lists
Like
Liked
57:12
Modern electronics assembly has seen so many changes over the years. In today’s era of IOT, the electrification of vehicles, the explosion in the use of bottom terminated components, the increasing implementation of electronics into harsh environments have all contributed to the increasing complexity and difficulty of building electronics. While so…
…
continue reading
![Artwork](/static/images/128pixel.png)
1
Episode 103: SMT Assembly Equipment for Low Volume Applications
55:09
55:09
Play later
Play later
Lists
Like
Liked
55:09
Today, we're going to talk about low-volume electronic assembly. We all know who the “big players” are when it comes to solder paste printers, pick and place machines, reflow ovens and other assembly equipment. But what choices does one have if they need to produce low-volumes of electronic assemblies such as prototypes and other low volume applica…
…
continue reading