))
Welcome to 3DTechTalks where we keep you up to date on all things 3D Printing (or Additive Manufacturing for the purists out there)!! Support this podcast: https://podcasters.spotify.com/pod/show/3dtechtalks/support
…
continue reading
Cars are getting smarter. But the shift to Level 5 autonomy will take time, testing, and the technical chops to perfect the connected car at the component level. That means sensors, 5G, systems on chip, and other foundational elements that are the heart of the autonomous vehicle. Drive World Conference & Expo launches in Silicon Valley with North America's largest embedded systems event, Embedded Systems Conf. The event brings together the best minds across the auto electronics and embedded ...
…
continue reading
1
Drive to Level 5: Car 2.0: Transportation-as-a-Service
33:14
33:14
Play later
Play later
Lists
Like
Liked
33:14
Wrapping up our summer series on autonomous vehicles, our final Drive to Level 5 interview is with Willard Tu, Senior Director of Automotive Technologies at Xilinx. Willard will be giving his presentation on "Transportation as a Service" at The Drive World Conference in Santa Clara CA on Thursday August 29th. The continuing evolution of autonomous …
…
continue reading
1
Drive to Level 5: True Vehicle Autonomy is Realistic. Or is it?
42:14
42:14
Play later
Play later
Lists
Like
Liked
42:14
Drive World Expo & Conference is the first industry trade show devoted to autonomous vehicles. This technology has the potential - and almost certainly will - impact every bit of our lives from how we work, play and plan our family finances (will we HAVE to by a car?) Sam Abuelsamid is a Principal Analyst at Navigant Research who will be discussing…
…
continue reading
1
Drive to Level 5: True Autonomous Vehicles. How close are we?
41:53
41:53
Play later
Play later
Lists
Like
Liked
41:53
Tim Wong is the Technical Marketing Executive for NVIDIA, a world leader in the developing the technology for autonomous vehicles and an authority on the subject. Tim will be a speaker and panelist at the Drive World Conference & Expo in Santa Clara CA from August 27th to 29th. Tim joined us for an excellent podcast interview on the feasibility of …
…
continue reading
1
The Drive to Level Five: Autonomous Driving in Adverse Weather. How Close Are We?
32:21
32:21
Play later
Play later
Lists
Like
Liked
32:21
LiDAR is the autonomous vehicle acronym that stands for Light, Detection and Ranging Technology. How good is it now and how good will it get in the years to come? Zhenchun Xia is the Senior Engineer, ADAS Control Systems at Mitsubishi. His presentation will address this topic at the Drive World Conference & Expo in Santa Clara CA on August 27th at …
…
continue reading
1
Talking to you car. Interview with Tom Schalk, VP of Voice of Technology at Sirius.
25:59
25:59
Play later
Play later
Lists
Like
Liked
25:59
Tom Shalk, VP of Voice Technology at Sirius, will be giving a talk at the Drive World Conference in Santa Clara CA August 27 - 29. Tom will be talking about the voice interface with the car and how that will be increasing substantially in the coming years. In this podcast Tom gives us a great update on the companies that have developed the voice re…
…
continue reading
1
The Drive to Level 5: Interview with Suzanne Deffree, Brand Manager Drive World Conference & Expo
32:01
32:01
Play later
Play later
Lists
Like
Liked
32:01
The Drive World Conference & Expo is a first of it's kind. Combining the technologies of autonomous vehicles with embedded systems, this is a must attend event for engineers and industry executives who need to stay on top of the changes in the industry . This event has been three years in the making and no one knows more about it than Suzanne Deffr…
…
continue reading
1
3DTechTalks - The Untold Truths about 3D Printing
27:10
27:10
Play later
Play later
Lists
Like
Liked
27:10
Ken Burns of Forecast3D gave an important talk at the Pacific Design & Manufacturing Conference in February about what he calls the "untold truths" in 3D Printing. This point can't be overemphasized. Every industry is guilty of believing it's own hype but new technologies at the start of that hyper growth phase are especially susceptible. Ken gave …
…
continue reading
1
3D TechTalks - Metal 3D Printing: Issues and Aerospace Applications.
26:19
26:19
Play later
Play later
Lists
Like
Liked
26:19
Applications for metal 3D Printing or as it is sometimes called - Metal Additive - are growing rapidly across many manufacturing sectors. One of those sectors where Metal Additive is - and will continue to have - an enormous impact is aerospace. Melanie Lang, co-founder of Metal Additive provider #Formalloy, is someone at the very heart of these ch…
…
continue reading
1
3DTechTalks - How Multi-Materials Will Transform Additive Manufacturing
26:17
26:17
Play later
Play later
Lists
Like
Liked
26:17
Dr. Behrang Poorganji is Director of Materials Technology at GE Additive. 3DTechTalks will be introducing Dr. Poorganji at The Pacific Design & Manufacturing Conference in Anaheim CA on February 5th. Dr. Poorganji's presentation goes right to the heart of what the driving force is in the industry. It's about the materials! The more material diversi…
…
continue reading
1
3DTechTalks - How Materials And Machines Will Impact the Supply Chain
32:11
32:11
Play later
Play later
Lists
Like
Liked
32:11
There are so many aspects to 3D Printing. The new developments in materials make news. The new printers that are coming out make news and of course the exponentially expanding applications of 3D Printing make headlines everyday. But a topic that too often gets overlooked is what are the business implications of 3D Printing? Whether you're a CEO, a …
…
continue reading
1
What are Digital Tools?? What do Digtal Tools have to do with 3D Printing?
24:14
24:14
Play later
Play later
Lists
Like
Liked
24:14
What are Digital Tools and what do they have to with 3D Printing? More importantly what do they have to do with the future of your business? Listen to our talk with Xiao Zhong, Analyst at Lux Research, about these important trends in Additive Manufacturing. Then reach out to 3DTechTalks.com about how to implement these important changes to keep you…
…
continue reading
1
3D Printing in Metal!! Q&A With Matt Sands, CEO of 3DEO
18:38
18:38
Play later
Play later
Lists
Like
Liked
18:38
There are a lot of questions about 3D Printing in metal with new technologies, materials and applications happening almost daily. Join us for our conversation with Matt Sands, CEO of 3DEO as we talk about their unique approach to Metal Additive and how they differ from the other 3D technologies. --- Support this podcast: https://podcasters.spotify.…
…
continue reading
1
Generative Design & 3D Printing - Two Technologies That Go Together Like Ketchup and Hamburger.
31:34
31:34
Play later
Play later
Lists
Like
Liked
31:34
Generative Design and 3D Printing are two completely separate technologies that complement each other perfectly. In the years ahead the adoption of generative design to product design will drive the adoption of 3D Printing which will in turn drive more generative design. Dr. Michael Bogomolny, Phd, CTO and co-founder of Paramatters talked with 3DTe…
…
continue reading
1
3DTechTalks - Interview with Jennifer Campbell, 3D Printing Technical Content Producer UBM
18:00
18:00
Play later
Play later
Lists
Like
Liked
18:00
Jennifer Campbell brings together great speakers on important topics in 3D Printing for industry trade shows like the Pacific Design & Manufacturing Conference in Anaheim CA from Feb 5 - 7. Listen to our interview talking about what she's seen the past couple of years coordinating these events and what to expect at the Pac Design event. --- Support…
…
continue reading
3DTechTalks is the podcast series devoted to keeping our listeners up to date on all things related to 3D Printing (or for the technical purists out there - "Additive Manufacturing". We'll be discussing the technologies, materials, use cases and most important of all, what does this all mean in the coming years. So join us every Monday, Wednesday a…
…
continue reading
