HTT052 – Hand Saws for Curves

Woodworking Hand Tools & Techniques

On today’s show, I discuss holding small stock for plowing grooves, long planes with narrow irons, frame saw vs. bandsaw for resawing, flattening wooden hand planes, and hand saws for sawing curves.

Supporters

Thanks to William Elliott, Arkadiusz Cwikowski, Bill Warnock, Krister K., Lawrence Pylinski, Jeff Skiles, Matt McGrane, Lance Stuchell, John Schuster, Steven Danenman, Kyle Groff, Jeff Mertz, Paul Joynes, Ethan Sincox, Michael Davis-Cheshire, Hernán Coronel, Jeremy Turner, Zayd Zaytoon, Hugo Baillargeon, Scott Runnels, Cameron Broome, Ted St. John, Dave Challis, John Baird, Jason Zvokel, Jay Derenthal, Reagan Herman, Thomas Feller, Roberto Holguin, Rob Bennett, Tim Morris, Gray Keene, Rob Switzer, Mike Holzhauer, John Gargano, Lawrence Schlack, Gary Wiskofske, Andrew McNaughton, Elmer Nahum, Peter Faulks, Ivar Sande, Thomas Corbin, Jacob Norton, Richard Yeskoo, Ray Deftereos, Borja Fernandez Sierro, Kevin Martin, Johnathan Rabkin, Michael Marino, Greg Nuckols, Steve Avery, and Ross Goodley for your support on Patreon.

Feedback

• NA

Listener Questions

• William needs to secure a small workpiece for plowing a groove.
• Paul is curious about a long jointer plane with a narrow iron.
• Pete is trying to decide between a frame saw and a bandsaw for resawing.
• Josh needs advice for flattening the soles of some old wooden planes.

Main Topic

Today’s main topic was inspired by a question from Patron John Baird and is a discussion on hand saws for cutting curves. Here are the links to the blades and saws I referred to in the discussion.

windwardwoodworks.com

https://www.fine-tools.com/gestell.html

http://www.woodjoytools.com/bowsaws/600mm-bowsaw-38x6t

Feedback, Questions or Topic Suggestions?

If you’d like to submit something for the show, send a voice note recorded on your phone to [e-mail]. You can also leave a voicemail at [phone] or use the contact form on the Contact page.

How to Support the Show

If you’d like to support the show, you can do so by visiting the Support page.